I have a Chrysler 300.The dealer put on chromes from a 300c and Pirelli's can this create problems?

I have a Chrysler 300.The dealer put on chromes from a 300c and Pirelli's can this create problems? 1 Answer

I have a 2007 Chrysler 300. One day the car is running fine. I put the key in the igntion and turn it and the radio and dash board lights go on. but the engine wont go on. I use my Autostart and the car starts right up. Can anyone pleae tell me what it could be . I thought it could be the Igntion Switch pin. 2 Answers

I have a 2007Chrysler 300. One day my car is fine. I get in my car I put the key in the igntion turn it on and the only thing that worked was the radio and the dash board lights.It would not start. ...

Help Please I have 2008 Chrysler 300c 5.7 V8 Hemi !! I can crank the car over, but it idles for a second and cuts out. I also notice a small puff of smoke out the exhaust when it cuts out?? 1 Answer

What I have done... I changed the starter relay fuse and it worked for a day, then the next day the same thing. Now when I change the relay starter it cuts off. I did notice though when the fuse wo...

Can I change a Sebring 2.7 2007 that the valves from a 300 Chrysler 2.7 300 2 Answers

Want to know if I can change the valves on my 300 2007 Chrysler from 2007 Chrysler Sebring convertible what they fit the valves

I have a 2006 Chrysler 300 2.7L. 1 Answer

I changed the o2 sensors on it and I am still getting error codes for both o2 sensors. The codes are o2 sensor 2/2 Circuit High P0158 and o2 sensor 1/2 Circuit High P0138. I am now getting the red...