I replaced the starter and the alternator and got a new dealer key
13 Answers
Thanks but I know what the code means but where do I go from here
ok so you have power to the starter and the skim key code and programmed to the car ....// so you have spark and fuel ??...are you getting pressure out the exhaust ?? are you cats plugged ??....//and there are no other codes then the p0700?can you read crank and cam state with your scan tool and see if they are in sync ....//try unplugging the cam sensor and cranking it over to see if it will start sometimes one will short out the other and not set codes also try un plugging the map sensor
not sure about that maybe the crank sensor ...you know I didnt ask what size engine you have in it 3.5 or the 5.7
ok I would still try unplug the cam sensor
Turn your ign on and leave overnight with a battery charger on it and it will prigram your key to your comp.