put ignition lock cylinder back into ignition housing

put ignition lock cylinder back into ignition housing 2 Answers

Ignition lock housing 1 Answer

I replaced the ignition lock housing because I couldn't turn the key to start the car, now I can start the car but when I cut it off the key won't come out unless I disconnect the battery. Does an...

installed a new ignition housing/switch/cylinder after disconnecting battery two days before was able to hook it back up and now when i try to start all dash lights blink and wont even turn over 6 Answers

just replaced ignition housing/switch/cylinderwith new key and no new alarm but still have old key with alarm and trunk buttons and when i put the new key in and start turning all dash lights flash in...

Ignition 1 Answer

What does it mean with the ignition when you can't turn the key to start car or when car is started it won't let you turn it to turn car off

i put a new ignition in after no turn of key now no start why? 2 Answers

i have a 2012 vw Jetta my key wouldn't turn except enough to unlock the steering wheel and so I replaced my ignition switch and the entire housing and kept the same key lock cylinder it was replace...