Why am I hearing a clocking sound every time I go over a bump, I replaced the struts and the clocking sound still persist?

Why am I hearing a clocking sound every time I go over a bump, I replaced the struts and the clocking sound still persist? 1 Answer

I have a 2008 Chevy Cobalt and I have put new brakes and rotors on this car 2 months ago and just this past Saturday I put in a new wheel hub bearing on passenger front. And when I go to get on my brakes it has that dragging sound like brakes against rotors, like bad brakes. Very confused...any ideas? 15 Answers

Put new brakes and rotors on both front 2 months ago, front end alignment and new tires less than six weeks ago. New wheel hub bearing with abs on passenger front. Stopped the whining while driving ...

my 05 chevy cobolt wont turn over. i have replaced the battery, coil pack, boots and plugs. 1 Answer

after I had got my car started I went to auto zone and got it hooked up to the computer it told me that it was misfiring, running lean, and a o2 problem. so I replaced the coil pack and the boots and ...

Why does my 2006 Chevy cobalt shift choppy when it's an automatic? 1 Answer

It's almost like it's have trouble shifting, like someone who doesn't know how to drive a standard well. The check engine light comes on and tells me the problem is my MAP sensor. Also, when I pu...

My cooling fan does not turn on. I hooked up wires to the fan and it turns on, I checked the fuse, the relay and put in a new sensor. It still will not turn on, even at 205 degrees. If I pull the wires out of the sensor it runs but won't turn off. 2 Answers

I checked the fuse, the relay, and put in a new sensor. The fan runs all of the time when I unplug the sensor but will not come on when I plug it back in no matter how hot it gets.