How do I properly diagnose my codes in my 2010 Nissan Maxima.
I’ve changed all my o2 sensors and purge valves on
my 2010 Nissan Maxima but I’m still getting a 07e8
and 0443
Did you clear the computer after the repair? You should have. If you did and the trouble codes came back the problem is most likely with the wiring going to the sensors. The EVAP system diagnostics will not run if the gas gauge is above the three quarters full mark or below the one quarter mark. Did you test the gas cap? That could cause an EVAP code too. Hope that helps! Jim
I’ve changed all my o2 sensors and purge valves on my 2010 Nissan Maxima but I’m still getting a 07e8 and 0443
2010 Nissan Maxima S
-
Maintenance & Repair
how do I remove the headlight panel in my 2004 Nissan Maxima?
2004 Nissan Maxima
-
Maintenance & Repair
I fixed many diff codes in recent months like EGR valve replacement, MAP Sensor, amd after a certified mechanic comfirmed tht my ECU was faulty and reason for throwing two other codes that he conf...
1999 Nissan Maxima GXE
-
Maintenance & Repair
I have a 1997 nissan maxima. My key is broken in the door my alarm keeps going off and my car won't start how can I start my car
1997 Nissan Maxima SE
-
Maintenance & Repair
I got a 2002 Nissan Maxima the switch has been knocked out of it I need to bypass the chip and the switch how do I do that I know there's a little box under the dash but I don't know what I'm looki...
2002 Nissan Maxima GLE
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.