I've got a 2010 Dodge Ram 1500 and have been having some electrical problems with it. Will periodically lose control to a bunch of functions, including the wipers, compass, steering wheel controls, adjustable pedals, brights/dims, and the strip of switches that include the hazards, traction control, tow/haul, etc. Think it could be a ground issue with the G300 ground wire which connects all of these.

I've got a 2010 Dodge Ram 1500 and have been having some electrical problems with it. Will periodically lose control to a bunch of functions, including the wipers, compass, steering wheel controls, adjustable pedals, brights/dims, and the strip of switches that include the hazards, traction control, tow/haul, etc. Think it could be a ground issue with the G300 ground wire which connects all of these. 1 Answer

i have a 99 dodge ram 1500 and just had the transmission rebuilt and it still wont shift out of 2nd gear....what else could it be?? 2 Answers

I just bought a 99 dodge 1500 a few months ago and just had the tranny rebuilt and it still wont shift out of second gear..what else could it be..we replaced all the sensors and rebuilt the vavle bo...

I have a 2007 Dodge Ram 1500 SLT with the 4.7. The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with the engine knocking. Is it possible that the 1/4" difference in length caused the pistons to strike the longer, incorrect plugs hence, that caused the knock? The shop admitted to me that the wrong plugs had been ordered. When asked if it was possible that they may have installed the incorrect ones, they told me that the thread size wasn't the same. Well, truth be told, it is the same size thread. Thanks for any input! 2 Answers

The plugs for the 4.7 have a reach of 3/4". I believe my mechanic may have installed the plugs for the 5.7 hemi which are 1" in reach. My truck went into the shop perfectly fine and came out with th...

I got a 98 dodge 1500 with a 360 in it what do I have to do to put a 310 in it I know it will bolt to the training but what kind of wiring issues will I have 2 Answers

I got a 98 dodge 1500 with a 360 in it what do I have to do to put a 310 in it I know it will bolt to the training but what kind of wiring issues will I have

i have a 2004 dodge ram 1500 5.7 hemi...was sitting in the truck with the truck running and idling talking on the phone and all of a sudden it stalled/ stopped running... 1 Answer

tried starting it ...it turned over but wont start...batter is good...check engine light isn't on...no code comes up when I run a scan...lotsa fuel in the tank wtf?