air filter removal

If you have a filter where air enters engine through the rear, it is very easy. Loosen the six hex screws. No need to remove the moulding near the scre near fender side. Loosen the control going into the air tube-two screws. Easy to do.There is a large clamp which attaches to the air cleaner housing. unloosen so it slips off the tube. At this point you lift the air filter housing cover and twist it a little to loosen the tube. It will slide off. assemble in reverse order. This is at most a ten minute process. Difficult part is removing the housing cover from the air tube. It takes some twisting,