1999 cadillac escalade starts up but turns off when put in drive been told sensor but what sensor could it be and how would i fix it
what sensor could be causing my escalade to turn off once I put it in drive and try to take off
Asked by wikked2213 Jun 07, 2015 at 06:43 PM about the 1999 Cadillac Escalade 4WD
Question type: Maintenance & Repair
what sensor could be causing my escalade to turn off once I put it in drive and try to take off
mikeatpriestlake answered 9 years ago
could be a tcc or torque converter control solenoid. when they go bad the torque converter wont unlock. google the location for your model. unplug it if possible, if it "fixes" then that is the problem. can be an expensive fix. you can drive the car fine with it unplugged but you will lose some fuel mileage
what sensor could be causing my escalade to turn off once I put it in drive and try to take off
1999 Cadillac Escalade 4WD
-
Maintenance & Repair
Light are bright so don't now what to do
1999 Cadillac Escalade 4WD
-
Maintenance & Repair
What to do when Cross battery connections on the 2007 Cadillac Escalade after correcting the connections it still shows no electricalpower to the truck it all
2007 Cadillac Escalade
-
Maintenance & Repair
Not sure its all wheel or not or its just standers. I think all wheel.
2004 Cadillac Escalade 4WD
-
Maintenance & Repair
I have a 07 escalade that my service suspension light came on I took it to cadillac dealer to diagnose and they told me I needed a new compressor I had already replaced the rear air bag shocks 3 m...
2007 Cadillac Escalade RWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.