I put a new ignition lock in because original wouldn't turn. After I put new tumbler in it started but died and now won't even turn over. Any ideas?

I put a new ignition lock in because original wouldn't turn. After I put new tumbler in it started but died and now won't even turn over. Any ideas? 1 Answer

1998 Chrysler Concorde wouldn't shift properly, ran at high rpms and the spedometer would read 80 mph even when I was only going 45.Replaced the input & output sensors and now can't get car to move. 2 Answers

My 1998 Chrysler Concorde wouldn't shift properly. I'd get to 45 mph and it wouldn't shift. It was running at high rpms and the spedometer started reading about 80 mph. I replaced the intake and ...

Relays in the door 1 Answer

I changed my fuel pump and everything and now my car won't start. Are there any relays in the door that go to the fuel system that will keep my car from starting? If u spray starting fluid in the ...

why cant i get my 2000 concord 3.2 started after a finder bender 2 Answers

car will not start after an accident

, "1996 Chrysler Concorde #14... 5 amp fuse burns out every time it is replaced on cruise message center. hvac fan blower not working but a/c compressor does work also speedometer, tachometer, fuel & temp. gauge not working all problems started at same time. air bag light working. Tried new ignition switch still blows fuse. 1 Answer

"1996 Chrysler Concorde #14... 5 amp fuse burns out every time it is replaced on cruise message center. hvac fan blower not working but a/c compressor works also speedometer, tachometer, fuel & temp...