how do i take front seats out of a 2000 chrysler cirrus lxi

I took out my electric drivers seat. Move it all the way back loosen the front two bolts a little. Move it forward loosen the back two bolts a little. If you have electric wires they snap in and out pretty easy. You can use a screw driver to separate them if necessary. Put the seat in a position where you can reach all four bolts and continue to loosen. Place the bolts in a safe place until you want to replace the seat.

Rear bottom seat is easy two metal clips in the front of the seat snap into the floor with plastic grips. Just pull the front of the seat up one side at a time. Save the plastic grips to reinstall the bottom seat into the floor. Should find some spare change under there.