1997 chrysler cirrus, why if tap on ecm and it stalls and starts right up after

1997 chrysler cirrus, why if tap on ecm and it stalls and starts right up after 2 Answers

1996 Cirrus stalls going down the street and sometimes won't start. Mainly after it's warmed up. Any ideas?? 1 Answer

I've been told it could be the Crank Shaft Guide sensor but can't seem to find out if that particular part is an exterior sensor or one within the distributor.

The Vent Blowers And the electric windows on my 1995 chrysler cirrus no longer function, both a/c and heat. my fuse box reports a handful of inoperable fuses when tested even after replacing them please read for further details this is an extremley confusing problem to me. 4 Answers

i was troubleshooting to try aqnd figure out what the problem was after replacing all the fuses, i realized that it wasn't going to fix my issue, when i test the connectors without the fuses plugged i...

1996 chrysler cirrus change a bad fuel injector and now the engine revs out when starting without even giving it any gas...can anyone help 2 Answers

1996 chrysler cirrus . had a bad fuel injector changed and replaced car was running good but still had a fuel leak at one of the injectors so replaced all orings .put everything back together and no m...

my rpm and km's dont work, plus when I pump fuel, it bubbles up and splashes out. 2 Answers

for my rpm and km, they both either work or they both dont at the same time, electrical? as well, I dont know what the problem is, air? but when I pump fuel right about at $3.00 the fuel pump stops, ...