Rough idle and stalling 2.7 Dodge magnum

Hi I don't don't know if you ever resolved the issue you were having but About a month ago I was having an issue with my magnum 2.7 and it acted like a bad vacuum leak at the brake booster so I replaced it didn't change anything, changed the pcv valve no change, replaced just about all my sensors and I really had no fault codes def. Not one for the egr, so finally about a month later decided to take off the egr valve boy that thing was so packed with carbon build up it had to be changed well got a new one installed it and changed all gaskets on the tubes made sure everything was tightened down and started the car it started right up no more rough idle or dying. So hey check your egr valve and the tubes connected to it. Clean and/or replace if necessary. I hope this helps someone

I did plugs and coil packs and it ran good but now I'm having the same problem a year later. I'm going to try changing the EGR. Thanks