check engine light still on
On my 2012 Dodge Journey the code was reading
Cadillac converter below threshold Bank 1 Bank 2 I
change the O2 sensors and the check engine light
is still on what could be the problem
Asked by GuruJCN8Z Jul 30, 2020 at 07:22 AM about the 2012 Dodge Journey R/T AWD
Question type: Maintenance & Repair
On my 2012 Dodge Journey the code was reading
Cadillac converter below threshold Bank 1 Bank 2 I
change the O2 sensors and the check engine light
is still on what could be the problem
On my 2012 Dodge Journey the code was reading Cadillac converter below threshold Bank 1 Bank 2 I change the O2 sensors and the check engine light is still on what could be the problem
2012 Dodge Journey R/T AWD
-
Maintenance & Repair
Engine light on ,I noticed the oil pressure gauge stays around 92psi to 96psi ,.changed oil and filter but pressure is still high
2013 Dodge Journey
-
Maintenance & Repair
So I keep getting 4 code a p 0031 p 0037 and p 0132. Replaced both 02 sensors but still stays on frond one of the wires burnt thru on the exhaust. Soni just replaced them both but won't go off I'm ...
2002 Dodge Durango SXT 4WD
-
Maintenance & Repair
I CHANGE THE SENSOR "BANK1 ,SENSOR1 BUT STILL THE "PCM FAILURE LIGHT ON". WHAT SHOULD I DO?DO YOU THING THE TIMING BELT HAS ANYTHING TO DO WITH IT?
2009 Dodge Journey SXT AWD
-
Maintenance & Repair
I have a 2.4 L Dodge journey that after traveling awhile, the check engine light and traction control light comes on the engine begins to miss.
2009 Dodge Journey SE FWD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.