I have a 2012 equinox Ltz 2.4 . Where is the output speed shift sensor?
6 Answers
The output speed sensor should be located on the transmission, near the output shaft, according to my GM Shop Service Manual. Go online and you will find diagrams that will show you.
I have been online and there is nothing saying where it is located. I have looked all around the output shaft and both cv axles and have found nothing. Is there something that needs to be removed to expose it? Can you share a link to the diagram you are talking about.
Dave. I could not find any specific videos for your car, but I think that watching these two will give you a good idea where to look for, the location for this sensor is almost the same on all transmissions. I hope this helps. https://youtu.be/saXWGEt1cmA https://youtu.be/h_bf_QitHGs
The links came out too close and can be confusing, here they are again. https://youtu.be/saXWGEt1cmA https://youtu.be/h_bf_QitHGs.
No luck, the first link ends with the A and the second starts there.
Neither one of those links was helpful. I have looked all around those areas and found nothing. Thanks anyway.