no ground to fuel pump or spark plugs
Chang plugs pcm fuel pump filter crank will
power on pump only if grounded to the body
not the harness also no spark
beatupchevy answered 6 years ago
I would trace the ground wire and take care of that ,it's best to keep things as they were designed , why did you replace the other stuff what was the problem, ?
Chang plugs pcm fuel pump filter crank will power on pump only if grounded to the body not the harness also no spark
2003 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
The car ran fine then next morning didnt start .no power to fuel pump or eec relay fuel/ pump relay / ac relay. Fuel pump and relays and fuses good .also the crank posistion sensor new, does the eec c...
1992 Ford Crown Victoria LX Sedan
-
Maintenance & Repair
I have a 2000 Ford Crown Victoria Police Interceptor. It has been running great never gave me any problems. All of a sudden yesterday I was driving and I heard a loud "POP" and right after it started ...
2000 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
changed missfire plug took off positive battery to reset check engine light cleaned post put back on now dash lights off only airbag and radio lights.now engine turns over but wont start I also had so...
2008 Ford Crown Victoria Police Interceptor
-
Maintenance & Repair
Location of fuel pump
1992 Ford Crown Victoria Touring Sedan
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.