Asked by Maxbaby1 Mar 26, 2018 at 03:39 PM about the 2013 Chrysler 200 Limited Sedan FWD
Question type: Maintenance & Repair
I went to have my emissions done on my 2013 Chrysler 200
and it failed. Thecreasin was "loose DLC" could you please
explain how this can be fixed? Don't ent to get ripped off by
a repair shop if it's something that requires a quick fix.
Thsnk you
enginecreator answered 6 years ago
Data link Connector? Well you should be able to look at the connector port and tell if its loose and then observe the way the factory installed it and see if there is a broken clip or holder.
Guru94YB31 answered 4 years ago
The clip is broken on the right side so it won't stay in the metal bracket.
I went to have my emissions done on my 2013 Chrysler 200 and it failed. Thecreasin was "loose DLC" could you please explain how this can be fixed? Don't ent to get ripped off by a repair shop if it...
2013 Chrysler 200 Limited Sedan FWD
-
Maintenance & Repair
No power to DLC, Digital Link controller
2005 Lincoln Town Car
-
Maintenance & Repair
No power at all no lights. No cranking nothing why no power
2013 Chrysler 200 Touring Sedan FWD
-
Maintenance & Repair
My Chrysler 200 is not detecting my key. The key and backup key are not unlocking the door with the buttons, the car does not detect when it is inside the care, the car will not unlock with the hand...
2015 Chrysler 200 C Sedan FWD
-
Maintenance & Repair
Change oil message came on. changed oil and filter. reset. everything fine until four weeks later (2000 km) change oil message is back?
2015 Chrysler 200
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.