2013 chrysler town and country passanger side brake light
2013 chrysler town and counrry touring L edition.
Running lights work, turn signals work driver side and top
light works fine. Passanger side running light works fine but
brake light will not engage. Checked fuses, good. Top light
(brake and running) is an led light. Replaced whole brake
light unit and brake light still does not work.
History, van was just into service and they replaces ignition
switch, passanger side blower motor and rebuilt
transmission. Dealership is staying they didnt cause this
issue but brake light worked before going in there so i dont
see how it was noy from them.
Question, would the brake light switch cause one light to go
out and not the other? Has anyone else had this issue and
what was the issue? Does anyone else have advise on what
else to check?
Running light works om both sides.
Did you ever find out what this was? I am having the same problem
I'm having same problem. Left brake light and 3rd brake light work fine. The dealer and a 2nd opinion mechanic told me the entire assembly needs changing. I did change it but it didn't help. what gives?
I am having the EXACT same issue, anyone get this figured out yet? Thanks in advance!!!
I am having the same problem. 2011 town and country. I will never buy a dodge again
The Chrysler T&C has separately fused tail lights. Check for a blown 15A fuse in the fuse box under the hood beside the battery.
I have the same issue, 2011 van with the passenger side brake light out. I have switched the around the left and right lens assembly and still the passenger side out but worked on the othger side when switched. also checked and switched fuses still to no avail. Can you think of anything else I can do before going to dealer? Thanks, good info here.
