my intrepid is not geting any spark

having not worked on one before, i may not be right, but i would start at the battery, check voltage, cold cranking amps, etc. then i would check the h/t leads for cracks, rips or any damage and replace if need, you should work on 23000 ohms per meter for h/t leads - check resistance. then if their good, check the plugs, clean them if needed, check gap with filler gauge, i dont know what the correct spec would be but it should be any more than 1.1mm ( i dont know what the imperial measurement is). then you if it still wont go, check fuel supply, check operation of pump. then i would check the fuel filter and/or replace it. i hope this helps.