Why am I having trouble starting my 1986 300zx Turbo.
Asked by Robert Feb 12, 2014 at 10:51 AM about the 1986 Nissan 300ZX 2 Dr Turbo
Question type: Maintenance & Repair
I have a 1986 300zx Turbo. It starts up fine, but after I have driven it for a while and stop
for half an hour or more, she hard starts. I have to crank it two or three times each time
pumping the accelerator to try and get it to catch. It's cranking but just will not kick in.
After about 3 or 4 times she finally turns over and I have to rev it up so she won't shut
off. I have changed plugs and wires; had the injectors cleaned; new gas filter; new air
filter, etc. Help!
6 Answers
try replacing the crank angle sensor. had to do that for my Z. she wouldn't crank and if she did, I'd get down the road and she'd stop with no warning.
change O2 sensor or unplug it see if it makes a difference
my 300zx 86 same problem got a code one red light and one green indication crank angle sensor i am buying a new from ROCK AUTO $144.00
It was the crank angle sensor she running fine now. it took 5days but all ok now so that sensor works every thing No spark, No Fuel, Want Start. all control by it. so good luck all.It is in the Distributor !!!!!
check your fuel pump PSI should be dead psi 70 psi in line 30 psi.
hard start when hot its in the book for hot and cold start.