1989 Camry 4 cyl starting problem
Asked by Cambodiacamryowner May 12, 2017 at 08:32 AM about the 1989 Toyota Camry STD
Question type: Maintenance & Repair
Car wants to start, fires then immediately stops. i have a trouble code 14.
I have opened and all re-connected the connector around the distributor
and fuel rail and nothing helps.
I live in Cambodia and very short of any knowledgeable help so I am
hoping someone can assist.
3 Answers
Look inside the distributor. do you see the Ignition Coil with a ..+....and...a ...--... sign on it? Put a test light on the -- side. When the engine cranks over the test light should Blink on and off. Get back to us with result.
I put a new distributor in my 89 Toyota Camry and it still will not fire
Do you have a 12 volt test light? Place the point of the Test Light into the IG- Terminal. The other end with the alligator clip goes to ground. Have someone Crank the engine over. The test light should Blink on and off. Yes or NO? This Diagnostic Connector is located under Hood Driver side. Remove cover for Terminal ID.