My 95 dakota has no headlamps high or low beam. No horn nodoorlocks no running lights park lights brakelights. Radio wipers windows dome light and turn signals all work fuses 5 ,6,7 and 8 show no pow
Asked by Nottamikanik Jan 25, 2018 at 01:14 PM about the 1995 Dodge Dakota SLT Club Cab 4WD
Question type: Maintenance & Repair
My 95 dakota has no low beam or high
beam headlights. No horn no doorlocks
no running lights park or brake lights...No
instrument panel lights..Only turn signals
Work front and back both sides. The radio
and windows and interior dome light
work.I have found that fuses 5,6,7,and 8
and 13 are good fuses but show no sign
of power when touched on both sides
with a test light. I have replaced the
headlight switch, turning signal switch
and checked all fuses. Checked all ground
wire connections that i coul find...very
frustrated and confused..trying to keep
my cool....lol. any obvious answers?
6 Answers
do you have trailer wiring?
I have the same issue and have done everything this guy did what I'd the answer iland yes I got trailer wiring witch font work only have blinkers
Did u ever get it figar out I have same problem
Did you ever get that problem fixed? I have a 95 dodge eith the same exact issues . Please help
Check the connection from the wire harness from the fuse box underneath the hood to the firewall. Its a Bolt on conect at the firewall to the harness underneath the steering column. There's Two separate harness. trace your voltage from the fuse box that it's getting 12v to the wires red one then check the connection by the firewall bolted on connection an pull the connection apart see if there any corrosion or broken wire. Underneath the steering column where the harness is connection through the firewall check for power through that 2nd wireharness an see if there is still 12v coming through then make your way to the switch. But my problem was at the firewall where the two harness connect an the main power line the pins was corrosive an broken dude to old age. I clean all the wires and took the main 12v wire extended around the connection thrpught the firewall to the other harness an splice it onto the main line on that harness an connected the two back with the main power running around the connection we got power again to the headlights, radio, cluster, buzzer, brake lights, both left an right turn signal.
