How do i replace the ignition lock cylinder on a 1988 gmc sierra c1500 350 v8 with tilt steering.

135

Asked by Caleb Jun 21, 2017 at 02:28 AM about the 1988 GMC Sierra 1500 C1500 Standard Cab LB

Question type: Maintenance & Repair

Today i went to start the truck and something in the ignition popped and now
when you turn the key nothing happens it moves through the positions but
then it doesnt do anything. How hard is it to replace.

40,075

beatupchevy answered 7 years ago

it shouldn't be that hard , generally you would disconnect batt. turn key to run and there should be a pin under the column(or somewhere) that you depress and the cylinder comes out , it works like a rack and pinion , if you look in the cavity you'll see the rack that operates the switch and the cam on the lock have to match up , it's all in the detail , a pro lock smith can save you some $$ instead of the dealer , check you tube for any videos

1 people found this helpful.

Mark helpful