1985 inline 6 4.9liter
Asked by Brian Apr 08, 2016 at 07:37 AM about the 1985 Ford F-150 STD Standard Cab SB
Question type: Maintenance & Repair
I have a 1985 Ford F150, I start by telling you what I have done. Replaced all the following Distrubtor Cap, Rotor,Iginition control mod, coil, plug wires, igniton relay, fuel filter (x2). Still no spark I checked out the plug to the coil it is getting power it read 11.89 volts. and one have a idea why I still not getting spark?
5 Answers
Thanks where is located?
Do you have to pull distributor to replace
OK put in a whole new distributor with a pickup coil, Still wont start it cranks but wont start. Like I said before it has a new distributor with new cap and rotor new plugs new ICM, new ignition coild, new ignition starter relay new ICM module connector because the old one the wires had broken off the connector . And body have any other ideas
Thanks the Distributor is a brand new one. I will however double check the wiring.
gypsymanjeff answered 5 years ago
Ground ..i did all that n more ..run grounds from battery to body n eng to body 3 cars all Ford's had same issue