After changing starter, ignition switch, and soleniod still no power in cab ended up cutting wire harness from cab to front of truck found the power feed for wire harness corroded and broken under the air box there were three yellow wires I resodered took and shrunk wrap and retape the harness fix the problem the truck is up and running
1988 Ford F-150 S Standard Cab LB
-
Maintenance & Repair
Brand New Ford f150 Lariat with all the bells and whistles! Dealer installed the cellular start module. The truck was delivered to me Saturday and ran fine for the Day. Sunday morning I could no...
2016 Ford F-150 Lariat SuperCrew 4WD
-
Maintenance & Repair
My brother in law hooked up the pos & neg battery cables backwards on my 88' f150. After changing the starter solenoid, i got the motor turning over when I turn the key but Ive got no power at the...
1988 Ford F-150 S Standard Cab 4WD LB
-
Maintenance & Repair
I know a guy who has a 1992 ford f150 that needs a automatic transmission. I already own a 1988 ford f150 with a good automatic transmission and i was wandering if i an put the 88 into the 92 before...
1992 Ford F-150 STD 4WD LB
-
Maintenance & Repair
Truck has been losing power, we replaced her alternator and battery, but she keeps sucking power out. she will start for a few hours and then her dashboard and my lights will all good out. she will ...
1994 Ford F-150
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.