1989 Ford F-150 5.0 5 Speed Manual Stalling
So, my 89 Ford F150 I picked up for $500 is giving me a problem. When I
first start up I here my High Pressure Pump on the frame wind up and the
truck shows about 15-20 PSI on rail. After starting she runs for a while until
she gets hot. I've monitored the high pressure fuel pump and voltage is
always present. Once she had been running a bit my pressure quickly
drops to 10 PSI, truck sputters then stalls. When trying to restart after stall I
can hear my High Pressure pump wind up but my PSI on the rail stays flat at
zero PSI. I think it's bad but I want to confirm. I would think if my sending unit
was bad It wouldn't stay running at all. Any opinions?