It was shifting just didn't seem like it was opening up it worked before then I worked on the timing bc the Rev was to high
Where did you set the timing at? Did you remove the est connector when you set it?
You need to set the timing at 0 with the connector unplugged. It's a little brown wire with a black tracer that has a connection in the middle of it.
1987 Chevrolet Blazer 2-Door 4WD
-
Maintenance & Repair
But when I put in drive i drive it an it clatter in gear an won't stop till I put it in neutral,
2000 Chevrolet Blazer LS 4-Door RWD
-
Maintenance & Repair
I didn't latch my hood down completely. driving 20-25 mph in my neighborhood, hood fly's up! now it will not turn over period. I changed the electronic fuel pump, the fuel filter! still won't turn ove...
1994 Chevrolet Blazer Silverado 2-Door 4WD
-
Maintenance & Repair
I have 1999 s10 blazer 4.3 blew up I put a 2001 4.3 back in the knock sensor are different what can I do ??
1999 Chevrolet Blazer 4-Door 4WD
-
Maintenance & Repair
When, I put my blazer in drive a few seconds past an it starts clattering, it sounded , like my 84,6.9 biesial suburban when the tourceconvert went out of my ,84, .. but the 2000 blazer will pull fo...
2000 Chevrolet Blazer LS 4-Door RWD
-
Maintenance & Repair
CarGurus has 874 nationwide Blazer listings starting at $19,499.
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.