need to find the shorted wire that keeps blowing the fuse.get a schematic and trace that circuit.
2000GMCowner answered 6 years ago
Did you change the Harness plug on the fuel pump inside the tank gmc had a problem with that so had to replace all those harness plugs they would melt and that would keep bl;owing the ecm fuse
I just changed my fuel pump on my 99gmc yukon 1500. My ECM-I fuse keeps blowing at key turn. And I still cannot get truck to start. Any ideas?
1999 GMC Yukon SLE 4WD
-
Maintenance & Repair
Please give me more insight as to what is going on With it.
1995 GMC Yukon SLT 4WD
-
Maintenance & Repair
I started my car the other morning and it was running up till the point I put it in reverse and then it died. My dad couldnt hear the fuel pump coming on, and the fuse still clicks under the hood. M...
2003 GMC Yukon 4WD
-
Maintenance & Repair
My 60 watt fuse keep blowing as soon as I place it in. I have a 2007 yukon denali xl. 6.0 l engine
2007 GMC Yukon
-
Maintenance & Repair
i am working on a o2 yukon replaced fuel pump and filter but not getting power at the pump. If i run a jumper wire from the battery o the prime spot on the fuse block i get power. but no power any oth...
2002 GMC Yukon 4WD
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.