Asked by deweycost Jan 20, 2019 at 05:41 PM about the 2004 Honda Accord EX
Question type: Maintenance & Repair
I have a 2004 Honda Accord 2.4. Had a blown head gasket. Changed head gasket and had head reworked. Put all back together and have triple checked timing marks. All are in the correct positions and still no compression. What am I missing?
rschweitzer answered 5 years ago
What does no compression mean? Check the compression in each cylinder. Did the original issue have you leaking fluids? Was there noticable loss of power? Did you check the block to make certain it was not warped or had cracks in it?
I have a 2004 Honda Accord 2.4. Had a blown head gasket. Changed head gasket and had head reworked. Put all back together and have triple checked timing marks. All are in the correct positions and sti...
2004 Honda Accord EX
-
Maintenance & Repair
Checked timing, checked compression (about 90 psi per cylinder), checked all fuses, replaced crank sensor, car getting fuel and spark and still not firing. DTC’s wer for random misfire on each cyli...
2007 Honda Accord
-
Maintenance & Repair
I have a 04 honda accord 2.4 ex I did timing chain replacement and according to me I did everything by the book,obviously not cus it looks like it jump 1or 2teeth,after install chain tensioner and...
2004 Honda Accord EX with Leather and Nav
-
Maintenance & Repair
My 2004 Honda accord today when i was on the freeway, out of no where it lost power but it runs and won't go more then 40mph trying to find out what it is
2004 Honda Accord
-
Maintenance & Repair
My 2004 Honda accord transimssion jerks when transmitting to gear two and jerks up and down when changing gear from Reverse to drive
2004 Honda Accord
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.