01 Windstar No crank, Battery is new, Starter replaced, solenoid engages but no crank.
Asked by GuruNKF57 Nov 05, 2019 at 04:24 PM about the 2001 Ford Windstar SE
Question type: Maintenance & Repair
Was working Friday tried to start Monday morning and no crank. Replaced the
battery and the starter same solenoid engages but motor will not turn over. All
fuses good no codes set
3 Answers
Unknown, I don't have a long breaker bar to even try turning crank. If there are any other things to try at this point.
lincolnscott49 answered 5 years ago
The only way to know if the motor is locked up is by turning it by hand with a socket that fits the harmonic balancer nut. You could also remove the starter and maybe turn it by the flywheel and a large screwdriver .