2006 hyundai accent no crank no start fuel pump won't turn on with good relays

When you turn the ignition to the on position, are all gauges working? Is the check engine light on? Have you checked the battery and the connections (terminals? Are they clean and tight?

Sounds like dirty or loose battery cables. Check battery voltage, it should be minimum 12.4. Check the battery cables for corrosion and make sure they're tight.

sorry it does crank just doesn't start everything is secure and fuel pump won't turn on we check the cable plug to the pump and it doesn't have power

Ok. Have you checked fuses. If there's no power to the pump, must have a bad fuse or relay.

unless theres a hidden fuse/relay box besides the one under the hood and under the steering wheel column, then yeah they all seem to be fine

yellow and orange cables from ignition wiring don't get power when cranking but do have power when keys turned not cranking.

just can't seem to find a 2006 ignition wiring diagram

Check for check engine codes, you may have a bad crank shaft sensor

For the ignition wiring diagram, go to Google and search "2006 Hyundai Accent ignition wiring diagram". It is there.

My 2002 mode;accent car dont engine cranking and doesnt start how to problem no any cluster light no ignition how to problem

@guruTRW9K This is an old post but the answer was already poste. Check battery voltage, it should be minimum 12.4. Check the battery cables for corrosion and make sure they're tight

could be inertia switch if it somehow got bumped. cuts power to fuel pump. will crank but no fuel

I have a 09 hyundai accent. My car cranks doesnt start. I have replaced the battery new fuel pump n filter replaced both purge solenoids, new coils n spark plugs and the main, fuel pump and starting relay amd the pcv im lost i. Dont know what else to do and are reader is saying no link... I need help please a mommy of 3