infiniti g35 garage door opener
8 Answers
littlehorn answered 16 years ago
May have to contact Infiniti dealer for instructions on this.
i beleve u hold the garage door open button and the button on the rearview mirror at the same time for it to set.
its more complicated than that. look it up in the manual. its got a step by step guide if i remember correctly.
Very easy. 1. Press and hold garage door opener 1 and 3 in your G35 until the light blinks 2. Take the remote you use to get into your house and press and hold the button near the rear view mirror. At the same time press and hold the button you would like to program for that door. The light will start blinking slowly and then faster. Let go of the buttons 3. Go into your garage and press the learn button on your garage door opener. These are different colors depending on the make and model. 4. within 30 seconds press and hold the button you programmed in your car until the light in your garage blinks. That's it. The process is pretty much the same for most vehicles. JT
Thanks but I cant find a learn button in my garage door. It only has 2 buttons A, B and both are already in use with garage door opener (key).
There is also a phone number to call if you get issues: 1.800.335.3515
the learn button is on the back of the garage door unit. it is normally red, orange or purple
Thank You Thank you, thank you. I don't have the Manuel any longer (stolen-must have thought it was a CD holder) and just got a new garage door. This worked like a charm and very simple. Did I say thank you?