I have a 1985 chevy c10 %2C the steering wheel is not in same position after each startup. wheels are straight but steering is at different positions. any know how to fix this %3F

I have a 1985 chevy c10 %2C the steering wheel is not in same position after each startup. wheels are straight but steering is at different positions. any know how to fix this %3F 1 Answer

I have a 1971 C10 with a 3 speed on the column. I can put the shifter in all 3 gears and reverse but when I let out the clutch the truck does not want to move until i accelerate and increase the RPM. 3 Answers

As far as I know the clutch is good. There is no noise or odor that indicates to me the clutch is bad, but I don't know for sure it could be I'm no expert on clutches. How can I know for sure if it ...

Im looking for a fuel system diagram for my 1985 Chevy C10 to figure out how to run a 2nd return line to my tanks. Can I just "T" off at the OEM fuel pump back to the original return line? 6 Answers

I just bought a new Crate 350 LB 5.7L engine. Went from a stock 305 and now its pretty much all custom. I have a OEM mech fuel pump, but new edelbrock carb wants less than 6psi than the 10psi that t...

i need to know what it takes to swap a 700r4 trans and install a th400 1 Answer

1985 chevy c10 pu short wheel base

i have a 1985 chevy c10 5.0L its a fixer upper. was running really good now idles rough when it does idle but most of the time it dies, it will stay running as long as i give it gas, any suggestions 7 Answers

idles rough, but mostly dies at stop lights or anytime idling, while run as long as i give it gas. i bought the truck as a fixer upper had been sitting for a couple of years, change plugs and started ...