will oil presser sencer stop the spark

will oil presser sencer stop the spark 4 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engine i think controls when the spark happens i also replaced the module on backside of distributer, the distributer, the coil,the wires the plugs, bht havent done the cap and roter.is that the only thing that will stop the spark process?ive also checked the oil pressure and water temp sensors 3 Answers

chevy suburban 5.7liter 4x4 silverado 1991,question i have fuel pressure the jets work i have power to the coil but no spark to the wires.i also have power to the black box on pass. side top of engi...

Help me get to the spark plugs 4 Answers

I can’t get to the spark plugs

1995 Silverado with 5.7 engine. It shows 50 pounds of oil pressure with no oil coming from the push rods. After about 5 minutes the oil begins to seep out. After about 10 minutes oil is oozing from all push rods but does not squirt out. I've seen chevy engines squirt the oil all over the engine bay. Is this a change made for adjusting the valves without using rags to stop the squirting oil? 2 Answers

Found a bad head gasket. When we took the valve covers off and ran the engine, it took 5 minutes to get oil to the rocker arms. After about 10 minutes the oil was oozing out but not squirting. Is this...

I have a k1500 chevy pickup with a 350 motor It will not start all the time and shuts off when coming to a stop sometimes. 1 Answer

There is no ground single coming from the ecm to the injectors. I have replaced the ecm and throttle position, air idle, and map sensors. I also checked the ground wires and cleaned the conections.