if i have a code P0157 do i replace both downstream sensors

if i have a code P0157 do i replace both downstream sensors 1 Answer

do I NEED to have sensors in my tires? 4 Answers

I have 2 slow leaks and I wanted to get 2 new tires. They tell me my sensors need to be replaced also and they cost $130 per tire!! NOT including the tires

I have tried about ten camshaft sensors on a Jeep Libert 2002 3.7engine exactly the same and it has not worked, so I want to know what should we do with the vehicle for it to work again? 3 Answers

The original camshaft sensor has been misplaced that is why we have tried many others but the same type but it still does not start the vehicle.

I have a 2007 Jeep Liberty with a 3.7 putting in a 3.7 from 2006..... 2 Answers

I have a 2007 Jeep Liberty with a 3.7 and am looking to swap in a 3.7 from a 2006 liberty. Both are 4x4's Is this a direct fit or not? What parts/sensors would have to be swapped if any? Please help!...

i have a 2004- 4 wheel drive- jeep liberty sport with a manual transmission, it will only go into gear if it is not running. 74 Answers

put it in gear with the motor off then with the clutch in tried to start it and it wanted to take off!! clutch feels good, clutch hydraulic has fluid in it...about 2 miles from home stopped at light t...