I recently tried to replace a Crank Position sensor from my 2003 jeep liberty renegade, but in the process it broke inside the engine. What do I have to do to remove this from the inside of the engine

I recently tried to replace a Crank Position sensor from my 2003 jeep liberty renegade, but in the process it broke inside the engine. What do I have to do to remove this from the inside of the engine 1 Answer

I have a 2002 jeep liberty that the engine went bad in. I was going to overhaul it but found out the block was no good. I got a bottom end ( block, crank and pistons ) from a salvage yard and overhauled it. I got it all back together with the original heads and all the other things from the original engine, crank sensor, cam sensor, new coil packs,new spark plugs,,,,,, everything is brand new. But now I have no spark. What could my problem be ? 2 Answers

2002 Jeep Liberty 3.7L. New Overhaul, no spark.

I have tried about ten camshaft sensors on a Jeep Libert 2002 3.7engine exactly the same and it has not worked, so I want to know what should we do with the vehicle for it to work again? 3 Answers

The original camshaft sensor has been misplaced that is why we have tried many others but the same type but it still does not start the vehicle.

I own a 2008 Jeep Liberty and the heater works but will not blow the air to the feet. 14 Answers

I own a 2008 Jeep Liberty and the heater works but will not blow the air to the feet nor to the back on the floor. From what my repair guy said he could see the gears are not stripped but they are n...

Help with the Fuel Filter replacing in a 2003 Jeep Liberty? 5 Answers

Before I start, this is for a 2003 Jeep Liberty V6 3.7-Liter truck. I have been told that my fuel filter needs to be changed and it is located in the rear/driver's side of the car. Here are the dire...