Can I swap a 1994 mustang gt 5.0 transmission into a 1999 mustang gt
13 Answers
migration_judge_roy answered 11 years ago
they are both fourth generation....it should work fine~ http://en.wikipedia.org/wiki/Ford_Mustang#Fourth_generation_.281994.E2.8 0.932004.29
migration_judge_roy answered 11 years ago
good point Jim, who thinks of electronics...I too am stuck in a pull choke and pull throttle mechanical frame of mind...was astounded when the MINI had no accelerator cable...just a funky black box~~ready for the future>...apparently I am not~:(
migration_judge_roy answered 11 years ago
So NO....is the conclusion...aren't GT's the big honkin' engines usually like Steve McQueen in Bullit~
migration_judge_roy answered 11 years ago
yeah. the 302...the "boss" 302 funny they mentioned Bullit on the wikilink there~
What if I pull the whole 5.0 including the transmission and swap it out with the 99 car
The 94 has frame damage but the 99has blown ttransmission
Sir what about a 96 will the transmission work in 99
migration_judge_roy answered 11 years ago
a cruise-O-matic...you may try to shop for parts for each and see if they are the same~
migration_judge_roy answered 11 years ago
measure the bell housings, bolt pattern and length...output shaft length and diameter bolt flange ring gear and flywheel...the same? ta da...it will work~
migration_judge_roy answered 11 years ago
yeah both together...selector will poke out of the floor...mounts the same? you might have to look at these, but am fully confident the 5.0 and cruise-0-matic will go in together...no prob~
I have a 99 mustang and also have a 302 with tranny and wiring harness what do i need to finish the swap
I have a 94 5.0 ho with a bad tranny what is the cheapest way not not to cheap