283 rebuild

283 rebuild 1 Answer

Could I rebuild my 283 with only a line hone, crank bearings, cam and cam bushings, rod bearings and piston rings? Cylinder bore and pistons look good. Crank has been turned to "0.20. I wanted to go...

283 motor need help 1 Answer

I took my 283 motor apart and put new head gaskets on it and got it all back to gether but now its not getting any fire.i put the distributer back in the same spot as i took it out off and i put a s...

1978 250 to a 1965 283 1 Answer

I’ve pulled my straight 6 out of my 1978 and have a 283 out of a 65 Chevy. The mounts are inverted on the 283 so what do I need to do to put the 283 in my 78? Buy new mounts or just the ones I hav...

My 1966 chevy pickup (C-20) v8 283 which uses a carburetor, not fuel injection, has a post that sticks straight up. The post is inside the top of the engine, and when I tried to put the carburetor back on, the post broke because it was corroded so much. How should I fix the post? Will I need to replace that part of the engine or is there another way, such as welding the blot back together? 3 Answers

rebuild 350 chevy eng in 1972 chevy c10 2 Answers

i rebuilt a 350 eng it runs too lazy when driving the truck it feels like it has little power i have a 400 t transmission with posee track 308 gears. the eng is bored out 40 over