2000 Masza 626 OHC Car wont start, all lights work, just that it doesnt turn over..I tried again about an hour later and it started right up..Got it home and again nothing it wont start. ANY IDEAS?

Asked by PAULA626 Feb 10, 2015 at 06:59 PM about the 2000 Mazda 626 ES

Question type: Maintenance & Repair

The car doesnt start..I turn the key but nothing..There are lights and they work, radio
works, and when I went back about an hour later it started again. I got the car home and
when I parked and turned it off, it wouldnt turn on again. Any ideas?

1,545

nismo1183 answered 9 years ago

your starter is probably going

2 people found this helpful.

Mark helpful

PAULA626 answered 9 years ago

Thank You!

Mark helpful

PAULA626 answered 9 years ago

Do you know where the Starter is located?

2 people found this helpful.

Mark helpful

Your Answer:

2000 Masza 626 OHC Car wont start, all lights work, just that it doesnt turn over..I tried again about an hour later and it started right up..Got it home and again nothing it wont start. ANY IDEAS? 3 Answers

The car doesnt start..I turn the key but nothing..There are lights and they work, radio works, and when I went back about an hour later it started again. I got the car home and when I parked and tur...

2000 Mazda 626 ES

-

Maintenance & Repair
My 98 mazda 626 lx 4cylinder died out and won't start back up it cranks but don't roll over, I changed the spark plugs with the spark box, changed the crank shaft position censor and has a new battery 3 Answers

I ran a diagnoses and no codes showed up and the smell of gas comes when I try to start it could someone help please

1998 Mazda 626 LX

-

Maintenance & Repair
i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i want to turn it from red(heat) to blue(cold), but it just swings freely. i think something must be broken. i tried to pull it out, but its hopeless. i don't want to break something else. the reason i'm asking this is because my heater is not working and this little problem might or might not be the reason. thanks for your help. 1 Answer

i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i wa...

2000 Mazda 626 LX

-

Maintenance & Repair
I have a Mazda 626 and it is overheating and when I put water into the radiator it won't fill up 1 Answer

I have Mazda 626 and it is overheating when the car is hot I put water into the radiator and it geysers out. When the car is cool and been standing some time it will not fill up, it just keeps runni...

2000 Mazda 626

-

Maintenance & Repair
i have a 200 mazda 626 just rebuilt the trans now if i put the shifter in low or revers it pulls but if i put it in 2nd or drive it dont and there is no codes 5 Answers

i got the care with the trans out of it i rebuilt it know it will pull in low and revers but it will not pull ot all if the shifter is in drive or 2nd there is not any codes in it and i dont think it...

2000 Mazda 626 ES

-

Maintenance & Repair

Looking for a Used 626 in your area?

CarGurus has 1 nationwide 626 listings and the tools to find you a great deal.

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

2000 Masza 626 OHC Car wont start, all lights work, just that it doesnt turn over..I tried again about an hour later and it started right up..Got it home and again nothing it wont start. ANY IDEAS?

3 Answers

Your Answer:

Looking for a Used 626 in your area?

Shortcuts

Search Mazda 626 Questions

CarGurus Experts

Find great deals from top-rated dealers

Related Models For Sale

2000 Masza 626 OHC Car wont start, all lights work, just that it doesnt turn over..I tried again about an hour later and it started right up..Got it home and again nothing it wont start. ANY IDEAS?

3 Answers

Your Answer:

Related Questions