the clip of latch is broken of the trunk in back, trunk itself.. what part I need and how much

Asked by Blackwood_2087 Jan 23, 2017 at 11:15 PM about the 2000 Mazda 626 LX

Question type: Maintenance & Repair

latch in back of trunk is broken it wont place. What part do I need whats name of it how much does it cost?

224,135

Rowefast answered 7 years ago

Check at your local parts stores, they may be able to help as they can look at this, otherwise going to have to hit the dealer.

Mark helpful

Your Answer:

the clip of latch is broken of the trunk in back, trunk itself.. what part I need and how much 1 Answer

latch in back of trunk is broken it wont place. What part do I need whats name of it how much does it cost?

2000 Mazda 626 LX

-

Maintenance & Repair
inside trunk latch & Key to trunk broken 1 Answer

The inside pull for trunk will not open trunk and my key will not either. Any help would be appreciated. 626 "95 Car is a god send but I kinda need to get in the trunk without going through back se...

1995 Mazda 626

-

Maintenance & Repair
How do I find out what kind of transmission I have in my standard 1991 626 Mazda and does it have some way to check the fluid? 3 Answers

And does it have some way to check the fluid? My car started making it difficult to put the stick into first gear now it's smells horrible and it won't go into 1st or 2nd but it will let me go into 3r...

1991 Mazda 626

-

Maintenance & Repair
what type of transmission fluid does the MAZDA 626 LX takes and how many quarts? 13 Answers

I am having a hard time finding out what type of transmission fluid my MAZDA 626 LX uses, and how many quarts. I recently changed it but the O/B light is blinking. I think my transmission is gettin...

2000 Mazda 626 LX

-

Maintenance & Repair
i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i want to turn it from red(heat) to blue(cold), but it just swings freely. i think something must be broken. i tried to pull it out, but its hopeless. i don't want to break something else. the reason i'm asking this is because my heater is not working and this little problem might or might not be the reason. thanks for your help. 1 Answer

i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i wa...

2000 Mazda 626 LX

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.