99 mazda is making a knocking sound when I stop and wants to accelerate again but stop after a while

Asked by tosjar2 Nov 30, 2012 at 05:03 AM about the 1999 Mazda 626 LX

Question type: Maintenance & Repair

Car is an automatic transmission. does it have anything to do with the gear?. Cos Shaft has been change and the noice is still there , pls assit

DavidH25 answered 11 years ago

Is the 'knock' gone at above, say, 30 mph? And what do you mean 'wants to accelerate"?. The RPM's go up on their own? Or did you mean when yo DO accelerate?

2 people found this helpful.

Mark helpful

DavidH25 answered 11 years ago

Also, can you hear it windows closed? How loud? Compare it to something---. the sound and level of

Mark helpful

Your Answer:

99 mazda is making a knocking sound when I stop and wants to accelerate again but stop after a while 2 Answers

Car is an automatic transmission. does it have anything to do with the gear?. Cos Shaft has been change and the noice is still there , pls assit

1999 Mazda 626 LX

-

Maintenance & Repair
I have a Mazda 626 and it is overheating and when I put water into the radiator it won't fill up 1 Answer

I have Mazda 626 and it is overheating when the car is hot I put water into the radiator and it geysers out. When the car is cool and been standing some time it will not fill up, it just keeps runni...

2000 Mazda 626

-

Maintenance & Repair
I have a 1984 Mazda 626 auto and it won't start. I changed the fuel pump and decypher my gas but still no improvement it's been sitting for a while and cranks on occasions. 6 Answers

It will Run sometimes but only if I keep spraying the carb with cleaner please help

1984 Mazda 626 Luxury Touring Hatchback

-

Maintenance & Repair
i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i want to turn it from red(heat) to blue(cold), but it just swings freely. i think something must be broken. i tried to pull it out, but its hopeless. i don't want to break something else. the reason i'm asking this is because my heater is not working and this little problem might or might not be the reason. thanks for your help. 1 Answer

i have a 2000 mazda 626 lx. the knob to control the temperature swings freely from hot to cold without any form of resistance whatsoever. i assume its supposed to offer some form of resistance it i wa...

2000 Mazda 626 LX

-

Maintenance & Repair
Knocking in my mazda 1 Answer

Run my mazda 626 1997 , with low oil ( oil light was slightly flickering but not on ) it no makes a knock knock knock sound when you run it but as you accelerate knock seams to ease off ,

1997 Mazda 626

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.