Car code po106
6 Answers
You may have a problem with the MAP sensor ----- https://www.yourmechanic.com/article/p0106-obd-ii-trouble-code-manifold-air-pressure-map- barometric-pressure-sensor-electric-circuit-output-range-and-performance-problem-by-john- nelson
I can't tell if this response is to me my car I took it in and the code red 6 that's the only thing that came up now my car hesitates when I go to start it but it starts and dropping just sounds really rough
I replace the map sensor like 6 months ago and again just the other day thinking that was the problem yet it did not fix the problem also we made sure there was not a clog in the throttle body
Read the link I sent you. The problem could just be a vacuum leak. When was the last time you tuned up your car?
Please message me I do not see the link you sent me it's been awhile since I got an actual tune up my ex boyfriend says he did a tune-up by changing out a few things under the hood like spark plugs I don't know much about vehicles if you can email me the link directly at my gmail brandy26.bv@gm ail.com or on here. My mom has been the only owner other than me to this vehicle it has 200,000 ml but was well taken cared of and i keep up regular oil changes and recently had alignment done was thinking maybe I needed to do a transmission flush but really haven't had any major problems ... some codes came up a while back indicating map sensor was bad that's why I replace that 6 months ago but when I took it into AutoZone last week when this started code po106 came up as the only code and the guy there indicated it could have been the map sensor so I replaced it again under its waranty but that did not fix it .the car runs it just runs rough and sometimes doesn't start until the 2nd time cranking it.. thank you for anything that could help
Just do an internet search for P0106.