How do I get my 2004 Mountaineer out of "test" mode on the message center?

Asked by Nickvdoe1991 Mar 26, 2013 at 01:44 PM about the 2004 Mercury Mountaineer Convenience AWD

Question type: Maintenance & Repair

About 40% if the time when I turn on
my Mercury it says test in the
message center and the gauges
sweep and the lights come on how
do I get it to stop?

49,005

kbro answered 11 years ago

I dont know of any quick way to fix this Im not sure why its doing it. I would say something is wrong with the insrument clutster. take it to the dealer and get it checked out see what they say.

1 people found this helpful.

Mark helpful

20

booba answered 6 years ago

Turn off the ignition and the cluster should return to normal. Is the RESET Button stuck in?

2 people found this helpful.

Mark helpful

Your Answer:

How do I get my 2004 Mountaineer out of "test" mode on the message center? 2 Answers

About 40% if the time when I turn on my Mercury it says test in the message center and the gauges sweep and the lights come on how do I get it to stop?

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
Broke handle to open trunk of my 2001 Mercury Mountaineer how do i just open the glass part? 2 Answers

I broke the handle to open my trunk to my 2001 Mercury Mountaineer so how do i just open the Glass window?

2001 Mercury Mountaineer 4WD

-

Maintenance & Repair
how do i find out what gears i have in my 2004 mercury mountaineer AWD 1 Answer

my front diff blow so now I have to fix it but don't know what gears I have and I know I have to have the same gears in my front and rear diff

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair
can i remove the front drive shaft out of my mountaineer 3 Answers

i took the front drive shaft out of my mountaineer and it ran good for a few days and now its slipping and the over drive light flashes

1999 Mercury Mountaineer AWD

-

Maintenance & Repair
I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. The digital display says that there is a "DOOR AJAR". I have checked all the doors as bet I can and they appear closed. BUT the interior lights remain on and the alarm will not set because off the ajar message. Am I missing something? Is the computer having a brain cramp.? I can get the alarm to set if I manually shut off the interior/dash lights too off. then it will work but no interior lights on the dash. This is driving me nuts. Can uou help?Thanks,John 12 Answers

I have a 2004 Mercury Mountaineer, V8, AWD, My problem, I think is in the computer? When I shut the engine off and try yo exit and lock the vehicle, setting the factory alarm system it won't do it. T...

2004 Mercury Mountaineer Convenience AWD

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.