Trippmeister answered 9 years ago
I'd replace the plug wires, if not new. Also, the problem could be a fuel injector. I got a code that it was missing on #2, and all electrical is new (cap, wires), so I replaced the injector, and it runs great! this is for missing,if it's hesitating nancy has the answer.
after a new distributor rotor and cap car hesitates from a stopped position
2000 Mercury Villager 4 Dr STD Passenger Van
-
Maintenance & Repair
I have a 1999 Mercury Villager that keeps shutting off the battery light stays on along with the brake light but it is a brand new battery. I also have a hole in the tail pipe and it aputters and the ...
1999 Mercury Villager 4 Dr Estate Passenger Van
-
Maintenance & Repair
My car is overheating It is not the water pump I have put a new belt on because the belt was gone the thermastat has been changed
1999 Mercury Villager 4 Dr Estate Passenger Van
-
Maintenance & Repair
noise doesn't go away, I used a hose to allocated the noise and seems coming from inside of the motor.
1998 Mercury Villager 3 Dr GS Passenger Van
-
Maintenance & Repair
i have got a1997 villanger that will not fire. i replaced the distributor,coil,crankshaft sensor,and resistor. i m a used car dealer and i need to get this vehicle back to the customer.can anyone tell...
1997 Mercury Villager
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.