Did they eliminate the O2 sensors and catalytic converter?
The ECU needs to be tuned to a custom exhaust, and you can't really tune a factory ECU, you may have to go to an aftermarket one. The ECU is expecting some amount of backpressure, and is relying on O2 sensors to dictate the air/fuel mix, and without knowing exactly what you did, your intake and exhaust were bound to have some issues.
I have a 1998 Ford Ranger XLT and my transmission is starting to slide when I try to step on the gas it just revs up and then when I Let Go is when the gear kind of grabs I wanted to know what mig...
1998 Ford Ranger XLT Standard Cab Stepside SB
-
Maintenance & Repair
My ranger is making a growling/grinding noise when my manual hub locks are set to free, it's a lous scary type noise, i'm hoping its nothing to serious but it sounds it so if anyone can help me out...
1998 Ford Ranger XLT Standard Cab 4WD LB
-
Maintenance & Repair
I am in the process of replacing lower ball joints on my 1998 Ford Ranger XLT 4WD. During removal of the right side hub from the CV axle, I broke the plastic retaining clip and sprung the spiral clip...
1998 Ford Ranger XLT Extended Cab 4WD SB
-
Maintenance & Repair
Can I swap a 1998 Ford Ranger 4 x 4 3.0 engine with a 2004 Ford Ranger 3.0 engine 2 wheel drive both are automatic transmission
1998 Ford Ranger XLT Extended Cab SB
-
Maintenance & Repair
My Ranger clicks when the key is turned! The cab lights & windows work but nothing else happens! Can you Help me?
1998 Ford Ranger Splash Extended Cab Stepside 4WD SB
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.