1997mercury villager replaced igniton switch ,crankshaft sensor fuel pump and distributor still code read error p0340 stalls then won,t start what is going on

1997mercury villager replaced igniton switch ,crankshaft sensor fuel pump and distributor still code read error p0340 stalls then won,t start what is going on 1 Answer

I have a 1999 Mercury Villager that keeps shutting off the battery light stays on along with the brake light but it is a brand new battery. I also have a hole in the tail pipe and it aputters and the the car shuts off. I have changed the fuel filter and the starter 2 Answers

I have a 1999 Mercury Villager that keeps shutting off the battery light stays on along with the brake light but it is a brand new battery. I also have a hole in the tail pipe and it aputters and the ...

no start, then started one time to go back to no stat 1 Answer

i have got a1997 villanger that will not fire. i replaced the distributor,coil,crankshaft sensor,and resistor. i m a used car dealer and i need to get this vehicle back to the customer.can anyone tell...

my mercury villager is making a loud noise by the belts, it seems is coming from inside underneath of ignition distributor, what could it be? 1 Answer

noise doesn't go away, I used a hose to allocated the noise and seems coming from inside of the motor.

1999 Mercury Villager Wont Start 4 Answers

Before my car die it started and as i put it into drive everything just shut off. Thought it was the starter so took the starter to check and it was bad so i got a new starter and now it is still not ...