do I need a new transmission iit go. Reverse and not drive

do I need a new transmission iit go. Reverse and not drive 1 Answer

Do I need a new anti lock brake system 1 Answer

I work on a 1998 Ford Crown Victoria I changed the driver side CV axle rear after that the brakes start reacting every time I will press them I have confirmed that the CV axle was the right one I cl...

I have a 2004 Ford Crown Victoria interceptor. I have replaced the crank positioning sensor, throttle positioning sensor and the cam sensor. I still do not get any power to the fuel injectors or the new fuel pump. Where do I go next? 1 Answer

The car first started stalling while driving, but would start right back up. Then it would only start after cooling down and finally it stalled at a stop sign and has not started since.

2009 Ford Crown Victoria goes in reverse but does not go in drive. 1 Answer

At first, it was idling high when it goes up a hill. Drove it with overdrive off, it run fine. Bought gas, drove, parked for two hour, move it few feet forward and parked. 30 mins later, started it, p...

Transmission won't go in no gear but reverse 2 Answers

Only go in reverse put on jack stands back wheels will turn but on ground won't go