2003 Eclipse Spyder GS no SES light and no fuel pressure.
Asked by kirshcrete Mar 22, 2019 at 10:07 PM about the 2003 Mitsubishi Eclipse GS
Question type: Maintenance & Repair
All relays work, new timing belt, new crank and cam sensor, and new fuel pump
yet the car will not start. However it will run just fine if I put power directly to the
fuel pump. I'm suspecting the computer but need a second opinion.
5 Answers
kirshcrete answered 5 years ago
Thank you. I will check that but shouldn't the Service Engine Soon light be on?
brotherben answered 5 years ago
It'll give an engine code if any sensors picks up something wrong but there's some things that can go wrong with sensors never picking it up. And also check your fuel pump relay.
kirshcrete answered 5 years ago
The fuel pump relay is located in the driver side end of the dashboard correct? It is clicking when I turn on the key so I'm assuming it is powering the pump.
kirshcrete answered 5 years ago
Update. I'm not getting power to the fuel pump when the engine is being cranked. I just used a multi meter to check voltage at the pump and got nothing.
