clutch went out then started working car wont go what could be the problem

Asked by Jennifer May 21, 2014 at 09:06 AM about the 1997 Ford Contour 4 Dr GL Sedan

Question type: Maintenance & Repair

I was driving my car the clutch all the sudden would'nt work so I was power shifting then
all the sudden the clutch starts working and the car wont go unless I get it toa very hjgh
rpm then it barely goes?

45,255

jamnblues answered 10 years ago

if the car won't go, then the clutch is NOT working- sounds like the clutch is slipping and needs repair-

Mark helpful

Your Answer:

clutch went out then started working car wont go what could be the problem 1 Answer

I was driving my car the clutch all the sudden would'nt work so I was power shifting then all the sudden the clutch starts working and the car wont go unless I get it toa very hjgh rpm then it barel...

1997 Ford Contour 4 Dr GL Sedan

-

Maintenance & Repair
My 1999 Ford Contour starts, reves itself High and then dies. What could be the problem? 2 Answers

I have a new fuel pump, spark plugs, plug wires and coil pack. After it got cold it would not start for several days. Now it starts then reves itself up high and dies. What could be the problem?

1999 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
I have a 2000 Ford Contour. I ran a few errands yesterday with no issues. I did not hear any changes in how the car starts or how long it takes. I went out to my car today and it does not turn over. All lights/electricity is on, it makes the sound like its trying to turn on, but will not turn. I bought a new battery hoping that was part of it. That is not the issue, left it plugged in over night and did not drain, so it does not appear to be alternator (which was recently replaced) what else could it be? (I am thinking of the starter, but could it be anything else?) 3 Answers

I ran a few errands yesterday with no issues. I did not hear any changes in how the car starts or how long it takes. I went out to my car today and it does not turn over. All lights/electricity is o...

2000 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
My 1998 Contour shudders, on then off, on then off... when driving at about 65mph. I just replaced the timing belt and it runs smooth at lower speeds and at idle. What could be the problem? 4 Answers

I recently replaced the timing belt and the car is running smooth at idle and lower speeds. Also, it stalls occasionally but starts up right away.

1998 Ford Contour 4 Dr SE Sedan

-

Maintenance & Repair
What could be wrong?? 7 Answers

Was driving 99 Ford contour it heated up a lil bit started smoking so pulled over. now it wont start. Motor turns over but sounds like maybe the starter isn't engaging??

1999 Ford Contour

-

Maintenance & Repair

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.