I have a 1994 Nissan XE Pickup 4 cyclinder-My truck will crank when it is cold, but will not crank when its hot.
I can get up in the morning and go to work and not stop anywhere and when you cut it off, it will not crank, until it get's cold. I have had the motor rebuild, relay switch, clutch, new battery and still is not running right? Please help!!!!!
Is it turning over but not starting or not turning over at all?
https://www.google.com/#q=1994+nissan+pickup+ignition+switch&tbm=shop
okay...the ring on the steering column~
a nice cartoon~
that do ya? ---Ring25?
Had same problem with a 97 model.. Ended up being the starter evev after I put a new one on..got a bad one from auto zone.After replacing it again works fine every time..
I have a1993 nissan pickup TRUCK 4cyl automatic DOING THE same crank it and kill it a little bit later won't crank back up put new starter,solid, battery, an some relays still same so l went into THE ing switch was able to separate it to where I COULD turn it WITH top of key or screwdriver crank every time ,IT'S the key cylinder I NEED BUT CAN'T GET IT OUT, PLEASE HELP IF YOU CAN TELL ME HOW?????
take the ingnition lock off the column by using a scratch awl or ice pick on the 2 headless bolts that hold it to the steering column. with the lock in your hand you will see a small shiny pin on the side of the housing near the key cylinder. drill a small hole 1/8 or 3/16th right next to the shiny pin and then pry up the pin. this pin holds the key cylinder in lock housings be careful of a spring and rod that is the key buzzer don't lose it. A locksmith could do this for you at their shop.
