no crank between ignition and starter relay on plmouth van 3.3l, I can jump relay socket wth wire to crank engine still no start. I put new ign. switch still no crank

Asked by Bull6008 Sep 13, 2015 at 08:20 PM about the 1996 Plymouth Voyager SE

Question type: Maintenance & Repair

with key on no signals to sensor feed wires. neutral safety switch has one hot wire. no power to primary ciol wires

rv63 answered 9 years ago

Check ICM..

4 people found this helpful.

Mark helpful

Bull6008 answered 9 years ago

Thanks for your answer. I will check the computer for input and output.

Mark helpful

rv63 answered 9 years ago

Ure welcome. Let me know how u faired on it..Have a good evening..

Mark helpful

Your Answer:

no crank between ignition and starter relay on plmouth van 3.3l, I can jump relay socket wth wire to crank engine still no start. I put new ign. switch still no crank 3 Answers

with key on no signals to sensor feed wires. neutral safety switch has one hot wire. no power to primary ciol wires

1996 Plymouth Voyager SE

-

Maintenance & Repair
1994 plymouth voyager 3.0 engine. stopped running and will not start. no spark. coil ok. when key is turned on I get voltage to the coil for one second, I can here a relay click then no voltage at the positive terminal to the coil. 4 Answers

1994 plymouth voyager 3.0 engine. stopped running and will not start. no spark. coil ok. when key is turned on I get voltage to the coil for one second, I can here a relay click then no voltage at t...

1994 Plymouth Voyager

-

Maintenance & Repair
replaced the timing tensioner pulley and timing idler pulley, now my engine will not crank. 2 Answers

I had a clacking noise in the timing belt cover. Turns out the timing tensioner ate itself. I replaced the timing belt, timing tensioner pulley and timing idler pulley. I made sure the cams and crank ...

1999 Plymouth Voyager Minivan

-

Maintenance & Repair
my van quit while running but did that on occasion. the last time it done it i tried to restart it and will not crank also will not fire and acts like not getting gas to motor.What could it be please 2 Answers

We have changed ignition switch, ICM, starter relay, fuel relay, starter, and the neutral switch. We have checked the to see if power was getting to starter and other parts and there is power. We ha...

1997 Plymouth Voyager Minivan

-

Maintenance & Repair
My 1998 Plymouth Voyager won't crank! After running fine I will go to use it and it won't crank. I have had it to the dealer three times for this problem. 2 Answers

My 1998 Plymouth Voyager won't crank! After running fine I will go to use it and it won't crank. I have had it to the dealer three times for this problem. The first time I was told it was the batter...

Plymouth Voyager

-

Maintenance & Repair

Looking for a Used Voyager in your area?

CarGurus has 1 nationwide Voyager listings and the tools to find you a great deal.

Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.

no crank between ignition and starter relay on plmouth van 3.3l, I can jump relay socket wth wire to crank engine still no start. I put new ign. switch still no crank

3 Answers

Your Answer:

Looking for a Used Voyager in your area?

Shortcuts

Search Plymouth Voyager Questions

CarGurus Experts

Find great deals from top-rated dealers

no crank between ignition and starter relay on plmouth van 3.3l, I can jump relay socket wth wire to crank engine still no start. I put new ign. switch still no crank

3 Answers

Your Answer:

Related Questions